Estes Solo #7288

Solo Model Rocket Kit

Solo Model Rocket Kit

Your Price item with disclaimer below


  • Brand: Estes

SKU: 1858539


Begin an exciting new hobby with Solo Model Rocket Kit. This kit provides the thrill of building and flying your own rocket. With a soaring range of five hundred feet and easy to understand instructions, the fun is only one build away from blasting off!


  • Length: 25 5/16″
  • Diameter: 1 5/16″
  • Skill Level: Beginner

Required (Not Included)

  • Engines (C6-3)
  • Starters
  • Recovery Wadding
  • Launch System

Kit makes 1 rocket.

Photo Gallery

Build History

  • 2/20/20 – Took pictures of package and components. Scanned components of package. Measure 1-1/2″ from rear of body tube and marked where Launch Lug tabs were located on body tube. Using Hobby Knife, bored hole into body tube. Applied Cement to launch lug and attached to body tube where holes were drilled to meet the launch lug tabs. Applied reinforcement decal over launch lug to help hold it to the body tube. Cut glider from index stock and taped it to the glider ring. Cemented nose cone base to nose cone. pushed fins into fin slots of fin can and slide them into place. Made copy of page 1 and cut out shock cord mount. Glued shock cord to shock cord mount and then inside of body tube at least 2 inches from forward end of body tube. Applied decals to model as shown in directions. This completes construction of the Estes Solo #7288 model rocket