Squirrel Works High Five #023

High Five

Length: 14 .45 in
Diameter: 1.325 in
Estimated Weight: 1 76 oz
Fins: Balsa
Nose Cone:  Balsa
Recovery: Mylar Streamer
Projected Altitude:  ft


Recommended Engines:

  • A8-3 (1st launch)
  • B4-4
  • B6-6
  • C6-5

Purchased from Squirrel Works on September 18, 2018 for $15.95 (Retail $15.95)

High Five pictures

Build History

  • 10/18/2018 – Purchased Model from  Squirrel Works for $15.95 (retail=$15.95)
  • 11/15/2018 – Took pictures of package and components. Scanned, decals,  plans, rings and cover sheet. Measurements were placed on Page 42 of Model Rockets Notes Book #4.
  • 11/20/2018 -Removed balsa components from balsa sheet. Removed centering rings from card stock. Measured motor mount tube 1/4″ from forward end and cut a 1/6″ slit into body tube for attachment of motor hook. Marked motor mount tube 1/2″ from each end and glued a centering ring. Glued engine block into the forward end of body tube so it was even with the forward edge. Glued hand pars together as shown in instructions. Marked body tube for the three fins and the launch lug.
  • 11/21/2018




  • Date – Flight Data